Upgrade Your Massillon Home's Pipes and Get Your Water Pressure Back

Ruling Out Other Causes of Low Pressure

Before we talk about new pipe, we check the simpler explanations. Pressure problems in Massillon homes can come from several places, and some are quick fixes.

• A partially closed main shutoff or a failing old gate valve
• A pressure-reducing valve that has drifted or failed
• Clogged faucet aerators or showerheads, which affect only one fixture
• A leak somewhere in the system stealing flow
• Problems in the underground service line between the street and the house

When the pipes are the culprit

If pressure is weak at nearly every fixture and gets worse when two are running, restricted pipe is the likely cause. Galvanized steel builds up rust and scale on the inside year after year, and in an older house the opening can shrink to a fraction of its original size. No valve adjustment fixes that. The pipe has to be replaced.

Living at Home While We Work

Most Massillon families stay in the house during a repipe. Here is roughly how a project goes after you approve the specifications.

Getting started

We cover floors, set up a clean work path and mark the walls we need to open. Main lines in the basement usually go in first because they are the easiest to reach and affect every fixture.

Middle of the job

Branch lines are run to bathrooms, the kitchen and laundry. Water is shut off during working hours and typically restored each evening, so you can still cook and shower.

Wrapping up

We pressure test the entire system, flush every fixture, check for leaks and walk you through the new shutoffs. Access openings are left neat and ready to be patched.

Keeping Wall Openings to a Minimum

Older Massillon homes often have plaster walls, tall ceilings and second-floor bathrooms stacked over the kitchen. We look for ways to run lines through closets, laundry chutes, cabinet backs and floor cavities instead of cutting into finished rooms. Flexible PEX tubing is especially helpful because it can be pulled through spaces rigid pipe cannot reach.

Where openings are needed, we talk through each one with you first.

Copper, PEX or Both

Most of our Massillon repipes use PEX for the long branch runs and copper at the water heater and main. Copper also makes sense where pipe stays exposed in a basement and you want a rigid, durable line. If you prefer an all-copper system, our Massillon copper piping service can handle that. We explain the tradeoffs during your free estimate.

If our inspection shows the underground service from the street is also undersized or corroded, replacing it with the interior piping makes the pressure improvement even more noticeable. For more detail on materials and planning, see our county-wide repiping overview.

Serving Massillon and Its Neighbors

Our shop in East Canton is about 13 miles from Massillon, and we also work in Navarre, Brewster, Canal Fulton and the surrounding area. Whether you are dealing with a single weak shower or a whole house that struggles to deliver water, start with a free estimate and an honest assessment.