Switching to a Gas Stove in North Canton

Is Your Home a Good Candidate?

The first question is whether the house has gas service. If your furnace, water heater or dryer burns natural gas, the answer is yes, and the job becomes a matter of running a branch line to the kitchen. If the home has no gas service at all, the utility would need to be involved first, and that is a bigger conversation.

The second question is the route. Many North Canton homes have basements, which makes running a new line under the kitchen floor fairly simple. Finished basements, slab foundations and long runs add work but are usually doable.

What the Switch Involves

From the plumbing side, the steps are straightforward. We size the new branch for the stove's gas input and the rest of the home's appliances, run it from the existing piping, and bring it up behind the stove location with a new shutoff valve.

Most of the time, the new branch connects to the main line near the furnace or water heater, where the pipe is large enough to supply another appliance. If your existing piping is already working near its limit, we will tell you before the work starts and explain the options, rather than discovering it after the stove is in.

• Confirm gas service and check the meter and main line capacity
• Plan the route from existing piping to the kitchen
• Install the branch line and an accessible shutoff valve
• Pressure test the new piping before connecting the stove
• Connect the stove with a new flexible connector and leak test
• Light every burner and the oven and check the flames

Electrical Changes to Plan For

An electric range runs on a large 240-volt circuit. A gas stove only needs a standard 120-volt outlet for its igniters, clock and oven light. That means an electrician should install a regular outlet behind the stove and safely deal with the old range circuit, either by capping it or converting it. We coordinate with your electrician so the work happens in the right order.

Without power, most modern gas stoves will not light their burners automatically, so the outlet is not optional.

Ventilation and Safety

Gas cooking adds heat, moisture and combustion byproducts to the kitchen. A range hood that vents outdoors is the best way to clear them. If your kitchen has only a recirculating hood or none at all, it is worth considering an upgrade with the switch. Add carbon monoxide alarms if the home does not have them already.

Repairs for North Canton's Existing Gas Stoves

Already cooking with gas? We repair clicking igniters, burners that will not light, ovens that will not heat and old connectors and valves. For the gas line portion of a conversion, see our North Canton gas line installation; for homes on LP, our propane service in North Canton. Our main gas stove page has more on repair and replacement. We also work in Canton, Green, Hartville, Louisville and Massillon.

If you have a gas stove that came with the house and you are not sure how old it is, the model tag inside the oven door or drawer usually lists it. That helps us find parts quickly and give you a realistic sense of whether a repair is worth it.