Navarre Outdoor Faucet Repair, Inside the Wall and Out

Why Outdoor Faucets Work Loose

Every time someone yanks a hose or hangs a heavy splitter from the spout, the faucet gets a little leverage on the wall. Over the years, mounting screws pull out of soft wood, sealant cracks and the faucet starts to wiggle. A loose faucet stresses the pipe connection inside, which can lead to a leak you will not see from outside.

In many older homes, faucets were never fastened well in the first place. Some are threaded onto a pipe nipple sticking through the wall with nothing holding the flange to the house.

• Faucet moves when a hose is attached
• Gaps or cracked caulk around the flange
• Stained or swollen siding below the faucet
• Soft or crumbling wood at the opening
• Water spots on the basement rim joist inside

Hidden Damage Around a Leaky Spigot

A faucet that drips onto the foundation or leaks at the wall connection keeps the surrounding area damp. Water can run behind siding and soak the sheathing and rim joist, the wood band that sits on top of the foundation. Over time that leads to rot and gives insects like carpenter ants an easy home.

When we replace a faucet, we look at the opening. If the wood is sound, we seal and fasten the new faucet properly. If it is soft, we let you know so it can be repaired before the new faucet goes in.

Doing the Installation Right

A well-installed outdoor faucet is firmly fastened to solid backing, not just held by the pipe. On vinyl siding we use a mounting block so the flange sits flat and sealed. The faucet is pitched slightly downward so it drains, and the hole through the wall is sealed inside and out to keep water, air and pests from getting in.

Inside, the pipe should be supported near the wall so pulling on a hose does not stress the joint. For frost-free sillcocks, we choose a length that puts the valve inside the heated space. Our copper piping work in Navarre and Navarre PEX service handle the supply connection.

What to Do About a Leak Right Now

If water is coming inside, close the outdoor faucet and the interior shutoff valve that feeds it. If there is no shutoff or it will not turn, close the main water valve. Dry the area to limit damage, and call us. Emergency leak containment is available, and our leak repair team in Navarre can trace water that has traveled inside the wall.

Once things are dry, take a photo of the faucet and the wall around it, inside and out. Those pictures help us plan the repair and can be useful if you file an insurance claim for water damage.

Our Process and Service Area

Every job starts with a free estimate. We inspect the faucet, the opening and the pipe inside, then explain the options. Once you approve the specifications, we do the work and finish with a quality inspection, running water through the faucet and checking for leaks inside and out.

We also serve Brewster, Massillon, Beach City, Bolivar and Strasburg. For more on outdoor faucet types and winter care, see our Stark County outdoor faucet page.